deucecoupe
Test Drive
Let's Rock. Let's Fly. Let's Motor.
Posts: 15
|
Post by deucecoupe on Aug 16, 2008 21:50:59 GMT -5
Thanks to Way I can add H Sport rear sway bar to my small list of ALTA CAI, Craven 15% pulley, and some after market wheels and tires. Future mods include exhaust, brakes, harness, stubby antenna, and those tower reinforcement cap things.
|
|
kylej
Inspection 2
Posts: 128
|
Post by kylej on Oct 24, 2008 21:32:53 GMT -5
I got a plastic stubby antenna off of eBay a while ago. Way recently installed a DDM street intake and H-Sport competition rear sway bar for me. Also I just got new wheels today.
|
|
MINItencan
Inspection 2
Drives way too fast!
No. 2 at Hoosier Pass, CO
Posts: 185
|
Post by MINItencan on Oct 24, 2008 22:09:28 GMT -5
Looking good kylej!! ;D
|
|
|
Post by justaz on Nov 28, 2008 23:27:57 GMT -5
I don't know if you can call this a Mod or not, but Wednesday I got seat heaters and they are after market. They are so nice! I even got 2 (since I threatened to only get one when Mike gave me ga hard time over them). Santa came early for me! Tazmini
|
|
|
Post by miniguru on Dec 28, 2008 22:18:28 GMT -5
Look I've gone BLING on my Street car, part of my custom powder coating. Now all I need to do is clean the rest of it.
|
|
Professor Zoom
Inspection 2
maybe a little too literal? or obscure?
Posts: 160
|
Post by Professor Zoom on Jan 2, 2009 8:52:34 GMT -5
Ways "Bling" looks even better in person. Then again reminds me that I need to do some cleaning also.
|
|
|
Post by tcooper4653 on Jan 27, 2009 15:15:16 GMT -5
Way added to my list on Saturday and Sunday.
JCW Intake, JCW Injectors, WMW ECU tune, 15% WMW Craven Pulley kit and competition Sway Bar. The non-performance mods shall go unlisted.
|
|
|
Post by tcooper4653 on Apr 14, 2009 22:05:49 GMT -5
Added the JCW Intake 'flap mod' and replaced the paper filter with a high flow filter. Also added a new set of Konig Feather's.
|
|
MINItencan
Inspection 2
Drives way too fast!
No. 2 at Hoosier Pass, CO
Posts: 185
|
Post by MINItencan on May 4, 2009 20:38:17 GMT -5
I can now add a WMW 15% pully to my short list of mods. Here's the story:
We went to Way's open house for his new shop in Atlanta and No. 2 started running hot. The coolant was low after just adding some a month or so ago. We stayed overnight and they took a look at him Monday and thought it was just a gasket on the thermostat leaking (as it has in the past). Nope, not the case, thought it was the o'ring. Nope, water pump was out! Thankfully they were able to get one.
While we were waiting on the pump to get there, Way said we really needed to put a pully on. Well most of you know I am not a big modder so I went out to the shop to talk about it. Low and behold the supercharger was sitting on the bench. How could you say no.....the easiest pully he installed in a while. I have to say after the dragon I have found I LOVE IT!!
|
|
|
Post by BRG JCW on May 13, 2009 9:54:43 GMT -5
just did the "add a brake light" kit from minispeed very good. IMO.. www.minspeed.net/R56BLK.htmif you need any help i can help. the first light took 40 min then the second took 15min. the experience helped a lot! for me at least
|
|
|
Post by BRG JCW on May 19, 2009 22:58:01 GMT -5
anyone wanna explain how to put on a lower front grill on a 08 mcs? I've got a friend in columbus who i'm sure can do it but if i can sort it out or get some help it'll be quicker and easier. i looked under the front bumper tonight and dont' know how to do this. so any advice or willingness to help me would be great!
|
|
|
Post by BKMini on May 20, 2009 16:54:24 GMT -5
I think I will keep my Mini original. I love it just the way it is.
|
|
|
Post by MINI Fireman on May 20, 2009 23:53:36 GMT -5
anyone wanna explain how to put on a lower front grill on a 08 mcs? I've got a friend in columbus who i'm sure can do it but if i can sort it out or get some help it'll be quicker and easier. i looked under the front bumper tonight and dont' know how to do this. so any advice or willingness to help me would be great! You have to take the whole front bumper facia off and snap the OEM grill out and replace it with the new one.
|
|
|
Post by miniguru on May 26, 2009 23:55:04 GMT -5
|
|
|
Post by millernoel19 on May 27, 2009 20:50:43 GMT -5
Ok, so if anyone read the old postings, I said no mods.... well I've started down the path and Mr. C is on his way to the 'dark' side. New 'joey' modded headlights - although I didn't do them myself (gotta love ebay) and some new brakes for the front and it only took me all race day to do them and one trip to the parts store for some tools I didn't have...
|
|