|
Post by minidiver on Dec 28, 2008 18:17:23 GMT -5
How about the DDM intake that uses the hood scoop for air?
|
|
|
Post by miniguru on Dec 28, 2008 22:14:55 GMT -5
The DDM R56 Race intake(uses the scoop) will be $450 and FREE install. If you want it let me know, I only have one in stock and this will give me time to order another before the event.
|
|
|
Post by skillet on Dec 29, 2008 15:29:21 GMT -5
How about crank pulley? Install cost? What is the Way Quicktune? Is that a version of RMW's Tune?
|
|
|
Post by miniguru on Dec 29, 2008 20:54:41 GMT -5
The 2% crank pulley is $250 installed
A Quicktune is basicly just a quick generic map I've writen. Or you've also heard them called canned tunes. Basicly I improve the throttle reaction, bump RPM limit, remove the 2800rpm dead spot, and then change the fuel/timing maps to make a few hp, without compromising reliabilty. I use the same software RMW does. If you want a Full tune like what RMW does you will have to have me take your car to the dyno. But I'll credit you the $200 for the QT on that full tune.
|
|
|
Post by skillet on Jan 2, 2009 11:57:39 GMT -5
Are there any plans on having Jan come to Indy or anywhere nearby to tune? The last one I heard of was in Michigan... What kind of gains are you typically seeing with your tune (15%, intake, exhaust, plugs)? A couple hp/tq or more like 10ish?
|
|
|
Post by miniguru on Jan 4, 2009 23:49:03 GMT -5
Why would we have Jan come to indy??? I do custom tunes using the same software and am local for you?
Most of my 15% pulley cars see an average of about 15hp, and about the same in torque. It just depends on Mods. Different exhaust seem to have different effects, and same with different year cars. Every car is different and every tune is different. The only cookie cutter tune I do is my quicktune, and it's not meant to be a big gain like a full tune, just suppose to be a nice little improvement, while maintaining reliability and not harming the engine.
|
|
kylej
Inspection 2
Posts: 128
|
Post by kylej on Jan 5, 2009 8:34:59 GMT -5
Any closer to tuning for the R56 yet?
Looking for a Kuda upper mount sometime soon. Got a car cradle for my phone with no place to mount it yet.
Would like to do something for an exhaust as well.
|
|
|
Post by miniguru on Jan 5, 2009 11:58:59 GMT -5
I've got the R56 exhaust all ready to go, Hendricks has one.
I could bring a Kuda mount for you if you want
And tunning on the R56 was suppose to be avail to me on Jan 1, I'll pester them and see what happens.
WAY
|
|
|
Post by skillet on Jan 5, 2009 12:05:20 GMT -5
Why would we have Jan come to indy??? I do custom tunes using the same software and am local for you? Most of my 15% pulley cars see an average of about 15hp, and about the same in torque. It just depends on Mods. Different exhaust seem to have different effects, and same with different year cars. Every car is different and every tune is different. The only cookie cutter tune I do is my quicktune, and it's not meant to be a big gain like a full tune, just suppose to be a nice little improvement, while maintaining reliability and not harming the engine. Ah, didn't realize you do the same "full tune". So if we did a quick tune, but then I came back and decided to do a "full tune", you'd credit me the $$ from the quick tune? How much for a Full tune? I'm assuming that would take place another day, another time, right?
|
|
|
Post by miniguru on Jan 5, 2009 14:48:58 GMT -5
Exactly you now you get it. A full tune for any customers that are return WMW customers is $450 plus the dyno time. Yes we would have to go to the dyno and do the tune there for a Full tune, the Quicktune is avail. any time any where. And the Qt is $200, so that will come off of the $450 for the Full tune when you get that. Hope that makes it understandable.
|
|
kylej
Inspection 2
Posts: 128
|
Post by kylej on Jan 5, 2009 23:11:54 GMT -5
Just emailed you Way. Please quote those when you get a chance.
|
|
|
Post by minidiver on Jan 6, 2009 8:07:58 GMT -5
Set me up for the DDM intake for Taz. Also give me a call sometime to set up the full tune on mine.
|
|
|
Post by miniguru on Jan 6, 2009 17:09:08 GMT -5
Need to know which DDM intake you want for Taz? DDM street, Race, or full race with hood scoop duct?
|
|
|
Post by glmini on Jan 6, 2009 18:30:20 GMT -5
OK, here is the location for the Mod Party:
2060 Stringtown Pike, Cicero, IN This is located about 25 minutes north of I465.
If you are wanting mods installed contact Waylen to make sure he has all of the necessary parts there. Also so he can schedule all of the work to be completed.
|
|
|
Post by minidiver on Jan 6, 2009 22:33:47 GMT -5
The DDM R56 Race intake(uses the scoop) will be $450 and FREE install. If you want it let me know, I only have one in stock and this will give me time to order another before the event. The DDM that uses the scoop for intake air for Taz. I also need a set of Green Stuff pads for my front Wilwood brakes.
|
|